PB1002 is a high quality replacement bushing or bearing that is placed in the end of the crankshaft or in the center of the flywheel, depending on the vehicle. It is used to support the end of the transmission input shaft.
Installation Instructions
Warranty
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1990-1993,1997-2001 | Acura | Integra | GS |
| 1992-2001 | Acura | Integra | GS-R |
| 1990-2001 | Acura | Integra | LS |
| 1990-1998 | Acura | Integra | RS |
| 1995-1996 | Acura | Integra | Special Edition |
| 1997-1998,2000-2001 | Acura | Integra | Type R |
| 1996-1998 | BMW | 318i | Base |
| 1996-1997 | BMW | 318is | Base |
| 1996-1999 | BMW | 318ti | Base |
| 2000 | BMW | 323Ci | Base |
| 1998-2000 | BMW | 323i | Base |
| 1998-1999 | BMW | 323is | Base |
| 2001-2003 | BMW | 325Ci | Base |
| 1992-1995,2001-2003 | BMW | 325i | Base |
| 1992-1995 | BMW | 325is | Base |
| 2001-2003 | BMW | 325xi | Base |
| 2000 | BMW | 328Ci | Base |
| 1996-2000 | BMW | 328i | Base |
| 1996-1999 | BMW | 328is | Base |
| 2001-2003 | BMW | 330Ci | Base |
| 2001-2003 | BMW | 330i | Base |
| 2001-2003 | BMW | 330xi | Base |
| 1991-1995,2001-2003 | BMW | 525i | Base |
| 1997-2000 | BMW | 528i | Base |
| 2001-2003 | BMW | 530i | Base |
| 1996-1999,2001-2006 | BMW | M3 | Base |
| 1999-2002 | BMW | Z3 | Coupe |
| 1999-2002 | BMW | Z3 | M Coupe |
| 1998-2002 | BMW | Z3 | M Roadster |
| 1996-2002 | BMW | Z3 | Roadster |
| 1987 | Chrysler | Conquest | Base |
| 1988-1989 | Chrysler | Conquest | TSi |
| 1984-1985 | Honda | Civic | 1500 S |
| 1984-1991 | Honda | Civic | Base |
| 1984-1987 | Honda | Civic | CRX |
| 1984 | Honda | Civic | CRX 1.5 |
| 1985-1987 | Honda | Civic | CRX HF |
| 1985-1987 | Honda | Civic | CRX Si |
| 1992-2000 | Honda | Civic | CX |
| 1984-2005 | Honda | Civic | DX |
| 1990-2005 | Honda | Civic | EX |
| 2005 | Honda | Civic | EX Special Edition |
| 1998-2005 | Honda | Civic | GX |
| 1996-2005 | Honda | Civic | HX |
| 1988-2005 | Honda | Civic | LX |
| 1988-1991 | Honda | Civic | RT 4WD |
| 1986-1987,1989-1995,1999-2000 | Honda | Civic | Si |
| 1999,2004-2005 | Honda | Civic | Value Package |
| 1992-1995 | Honda | Civic | VX |
| 1988-1989 | Honda | Civic | Wagovan |
| 1993-1997 | Honda | Civic del Sol | S |
| 1993-1997 | Honda | Civic del Sol | Si |
| 1994-1997 | Honda | Civic del Sol | VTEC |
| 1989-1991 | Honda | CRX | Base |
| 1988 | Honda | CRX | DX |
| 1988-1991 | Honda | CRX | HF |
| 1988-1991 | Honda | CRX | Si |
| 1987-1988 | Mazda | B2600 | Base |
| 1987-1988 | Mazda | B2600 | LX |
| 1987-1988 | Mazda | B2600 | SE-5 |
| 1988 | Mitsubishi | Starion | ESi |
| 1987-1989 | Mitsubishi | Starion | ESi-R |
| 1995 | Porsche | 911 | Carrera |
| 1989-1997 | Porsche | 911 | Carrera 4 |
| 1996-1997 | Porsche | 911 | Carrera 4S |
| 2002-2005,2008 | Porsche | 911 | GT2 |
| 2004-2005,2007-2008 | Porsche | 911 | GT3 |
| 2007-2008 | Porsche | 911 | GT3 RS |
| 1993-1994 | Porsche | 911 | RS America |
| 1994 | Porsche | 911 | Speedster |
| 1996-1997 | Porsche | 911 | Targa |
| 1991-1992,1996-1997,2002-2005,2007-2008 | Porsche | 911 | Turbo |
| 1993-1994 | Porsche | 911 | Turbo 3.6 |
| 1988-1989 | Porsche | 911 | Turbo Carrera |
| 2005 | Porsche | 911 | Turbo S |
Related Products
Here's some other products you may be interested in!
-2%
ACT 2006 Subaru Impreza XT-M/Perf Street Sprung Clutch Kit
SB10-XTSS kit features an Xtreme pressure plate for the most demanding driver. ACT Xtreme pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life....
-2%
$1,240.99
$1,265.63
ACT 2004 Subaru Impreza XACT Flywheel Streetlite
Noticeably improved engine response and acceleration, OE to mild gear rattle; Heat-treated forging for strength and toughness, induction-hardened ring gears for maximum life; One piece construction allows less opportunity for...
$683.99
ACT 93-98 Toyota Supra Twin Turbo Clutch Alignment Tool
AT70 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with...
$24.99
ACT 13-14 Hyundai Genesis Coupe 2.0T Release Bearing
RB012 is a high quality, direct-fit release bearing that meets or exceeds OE standards.WarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 2013 Hyundai Genesis Coupe 2.0T 2013 Hyundai Genesis Coupe...
$229.99
ACT 2007 Jeep Wrangler Release Bearing
RB001 is a high quality, direct-fit release bearing that meets or exceeds OE standards.Installation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 2016 Jeep Wrangler 75th Anniversary 2007-2010,2012-2017 Jeep Wrangler Rubicon...
$100.99
ACT 2010 Jeep Wrangler Pilot Bearing
PB1006 is a high quality replacement bushing or bearing that is placed in the end of the crankshaft or in the center of the flywheel, depending on the vehicle. It...
$33.99
-5%
ACT 18-22 Jeep Wrangler JL / 20-22 Gladiator JT Pro Mass HD-O / Street Sprung Clutch Kit
JP6-HDSS kit features ACT's highly regarded Heavy Duty pressure plate and most popular street disc delivering generous torque capacity, smooth precise feel, quiet operation and increased toughness to withstand the...
-5%
$1,964.99
$2,078.09
-5%
ACT 18-22 Jeep Wrangler JL / 20-22 Gladiator JT Pro Mass HD-O / Race Sprung 6-Pad Clutch Kit
JP6-HDG6 kit features ACT's highly regarded Heavy Duty pressure plate and spring-center 6 pad race disc delivering high torque capacity, aggressive engagement, quiet operation and increased toughness to withstand the...
-5%
$1,993.99
$2,095.98
Sleeve High Neck Bodycon Dress
$132.00
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nam fringilla augue nec est tristique auctor. Donec non est at libero.