All
SPC Performance U ADPTRS FOR 40910 (3)
$38.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance UNIV SPRING COMPRESSOR
$398.99
This two-piece internally threaded spring compressor is a great option for MacPherson Strut, coilover, and other sccessible springs. With 1-11" of travel and a 2645 lbf (1200kg) max qoekinf load with a 3X safety factor,...
SPC Performance UNIVERSAL TIE ROD TOOL
$55.99
This economical tool fits most cars & light trucks with split tie rod sleeves. Double-end feature makes 360 degree turns possible. California Residents WARNINGInstallation Instructions
SPC Performance VALVE STEM PULLER
$59.99
This easy to use valve stem puller protects the wheel and rim while you get the job done quickly. Simply screw the pivoting head onto the valve stem, slide the hard rubber protecting block to...
SPC Performance VBG BRAKE LATHE BITS
$72.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance WHEEL CENTERING
$127.99
Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off-center" or clocked position. The 32115 is for Ford F450/550 Super...
SPC Performance WHEEL LOCK REMOVAL KIT
$234.99
This set safely removes and replaces GM,Ford and Chrysler wire wheel hubcap locks on 1978 and up vehicles. Variable drive keys will also fit Corvette,McGard hubcap locks and aftermarket wheel lug locks. Kit comes in...
SPC Performance WHEEL WEIGHT PLIERS
$55.99
The best tool for removing or installing passenger car and light truck wheel weights. Incorporates hooks for removal of wheel weights on many different types of wheels. Not for use on aluminum or decorative wheels....
SPC Performance WIDE 10 deg. SCREW IN
$157.99
The new WIDE 10 & 20 degree screw in balljoint plates accomodate larger coil springs being used on many late model racing chassis. The wide plate allows plenty of room for both caster and offset...
SPC Performance WIDE 20 deg. SCREW IN
$164.99
The new WIDE 10 & 20 degree screw in balljoint plates accomodate larger coil springs being used on many late model racing chassis. The wide plate allows plenty of room for both caster and offset...
SPC Performance XAXIS Remove/Install Adapter
$61.99
Using a shop press, the tool is designed for quick, easy removal & installation of the 15617 xAxis joint when building your own Jeep JK track bar. California Residents WARNING
SPC Performance XAXIS Remove/Install Adapter
$77.99
Using a shop press, the tool is designed for quick, easy removal & installation of xAxis sealed flex joints with 40mm OD and up to 60mm wide; including part numbers 15623, 15625, 15627, 15629, 15631,...
SPC Performance XAXIS Remove/Install Adapter
$68.99
Using a shop press, the adapter is designed for quick, easy removal & installation of the 15607 xAxis sealed flex joint and any other bushing with 1.75" OD. California Residents WARNING
SPC Performance XAXIS Remove/Install Adapter
$54.99
Using a shop press, the adapter is designed for quick, easy removal & installation of the 15613, 15615, and 15616 xAxis sealed flex joints or any other bushing with a 1.8125" OD and up to...
SPC Performance XAXIS Remove/Install Adapter
$76.99
Using a shop press, the adapter is designed for quick, easy removal & installation of the 15609 xAxis sealed flex joint and any other bushing with a 2" OD. California Residents WARNING
SPC Performance XAXIS Remove/Install Adapter
$76.99
Using a shop press, the adapter is designed for quick, easy removal & installation of the 15619 xAxis sealed flex joint and any other bushing with a 2.25" OD. California Residents WARNING
SPC Performance XAXIS Remove/Install Adapter
$86.99
Using a shop press, the adapter is designed for quick, easy removal & installation of the 15611 xAxis sealed flex joint and any other bushing with a 2.5" OD. California Residents WARNING
SPC Performance XAXIS Remove/Install Adapter
$65.99
Using a shop press, the tool is designed for quick, easy removal & installation of the 15605 xAxis sealed flex joint and any other bushing with a 1.25" OD. California Residents WARNING
SPC Performance YOKE FOR 498
$87.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions
SPC Performance YOKE FOR 499
$77.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions
SPC Tie Rod Adjustment Wrench Set - 4pcs
$608.99
Every alignment tech needs this tie rod wrench set in their tool box. Adjust inner tie rods with this easy to use 4 piece wrench set. The wrenches feature spring loaded toothed jaws and sturdy...
SPL Parts Adjustment Wrench
$105.99
Our black anodized CNC machined billet aluminum wrench is a useful addition to your racing tool box. Designed for use with our hybrid adjusters and hex links/turnbuckles, this small wrench works in tight spaces and...
SPL Parts Turnbuckle FE FRS OEM Length 6.75in Long 3/4in Hex
$90.99
SPL Parts Turnbuckle FE FRS OEM Length 6.75in Long 3/4in Hex
