All
SPC Performance STEERING KNUCKLE TOOL
$152.99
Stop damaging steering knuckles by removing linkages or struts with pry bars, screwdrivers and hammers. Use the Steering Knuckle Spreader Tool to make quick work of tight and corroded steering knuckles by simply turning the...
SPC Performance STEERING WHEEL HOLDER
$161.99
A must for proper alignments. This tool securely holds the steering wheel and it's covered hooks & base prevent damage to the steering wheel and seat.----------------------------- CAUTION: This product is not a locking device. Use...
SPC Performance SUV/TRUCK KIT ASST BOARD
$1,192.99
This great new board set includes the most popular parts for aligning today's trucks and SUVs. Don't be caught without the part you need. Shipped with our polymer display board. California Residents WARNINGInstallation Instructions
SPC Performance Tandem Shim-FRTLNR 1/16in (100)
$190.99
These universal shims are designed to be installed on a variety of applications. Use these at the ends of the torque rods to change toe or thrust angles on Freightliner, Hendrickson and Navistar heavy duty...
SPC Performance Tandem Shim-FRTLNR 1/32in (100)
$172.99
The universal shims are designed to be installed on a variety of applications. Use these at the ends of the torque rods to chagne toe or thrust angels on Freightliner, Hendrickson and Navistar heavy duty...
SPC Performance Tandem Shim-FRTLNR 1/8in (100)
$205.99
These universal shims are designed to be installed on a variety of applications. Use these at the ends of torque rods to change to or thrust angles on Freightliner, Hendrickson and Navistar heavy duty tandem...
SPC Performance TANDEM SHIM-IHC 1/16 (6)
$58.99
These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used...
SPC Performance TANDEM SHIM-IHC 1/32 (6)
$56.99
These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used...
SPC Performance TANDEM SHIM-IHC 1/8 (6)
$64.99
These I.H.C./Navistar Torque Arm Shims will change thrust angle and toe when installed between the torque arm and the spring hanger. On Navistar they will also center the axle with the frame rails when used...
SPC Performance THRUST ALIGN PLATE 2.5in.
$213.99
Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle,...
SPC Performance THRUST ALIGN PLATE 3in.
$219.99
Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle,...
SPC Performance TIE ROD ADJUSTING TOOL
$76.99
Four position feature and 360deg rotation lets you grip the sleeve properly, even with limited access. Fits most passenger cars & light trucks. California Residents WARNINGInstallation Instructions
SPC Performance TIE ROD PULLER
$176.99
Removes tie rod ends with a straight, fast, firm pull. Makes installation of the 87330 camber/toe kit easier. It has a 2-1/4" reach adn a 2-1/2" spread. Also for pressing bushings. Replacement center screw with...
SPC Performance TIE ROD TOOL
$60.99
This tie rod tool spreads the tie rod adjusting sleeve for easier adjustment. You can use these tools with a bracker bar for additional power. With 1/2" drives. California Residents WARNING
SPC Performance TIE ROD TOOL
$60.99
These tie rod tools spread the tie rod adjusting sleeve for easier adjustment. You can use these tools with a breaker bar for addition power. With 1/2" drives. California Residents WARNING
SPC Performance TIE ROD TOOL
$60.99
These tie rod tools spread the tie rod adjusting sleeve for easier adjustment. You can use these tools with a breaker bar for additional power. With 1/2" drives. California Residents WARNING
SPC Performance TIE ROD TOOL
$65.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance TIE ROD TOOL
$62.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance TIE ROD TOOL SET-5PC
$237.99
This kit includes part numbers 71959 through 71999. It will allow adjustment of most cars and light trucks and also includes the two larger adjusting tools needed for the new Ford Super Duty pickups. Tools...
SPC Performance TORQUE CHART
$35.99
Find out your correct torquing specs quickly and easily with this handy chart. Referenced by both car/truck make/model/year and torque stick color, this chart is the quick guide all techs need. 13" x 14.75". California...
SPC Performance TORQUE EXT 140 LB-FT
$116.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions
SPC Performance TORQUE EXT 160 FT LBS
$119.99
160ft. lbs.-Orange-1/2" drive extension for: 1999 & up Ford Super Duty trucks and 2000-2005 extensions. California Residents WARNINGInstallation Instructions
SPC Performance TORQUE EXT 400 FT LBS
$215.99
This heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one piece...
SPC Performance TORQUE EXT 550 FT LBS
$273.99
This heavy duty 1" drive torque extension provides a fast, s imple method to achieve manufacturers' specified torque ever y time using an impact wrench. No more guesswork! This exten sion features solid one piece...