All
SPC Performance BALLJOINT (.5 deg.)
$164.99
Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunctuion with 72509 Ball Joint Press for removal and installation of these pin...
SPC Performance BALLJOINT (1.5 deg.)
$164.99
Change caster and camber with this upper offset pin joint that replaces the OEM pin joint. Use Installation Sleeve set 23580 in conjunction with 72509 Ball Joint Press for removal and installation of these pin...
SPC Performance Balljoint For 72270
$191.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance BAND 1/4 X 3/8 X 6.5
$30.99
Small black rubber gasket-type silencer band for solid rotors. DIMENSIONS: 1/4" x 3/8" x 6-1/2" diameter. California Residents WARNINGInstallation Instructions
SPC Performance BAND 1/4 X 3/8 X 9
$31.99
Large black rubber gasket-type silencer band for solid rotors. DIMENSIONS: 1/4" x 3/8" x 9" diameter California Residents WARNINGInstallation Instructions
SPC Performance BJOINT INSTALL ADPTR SET
$124.99
The sleeves are designed to match the angle of the yoke on the axle housing to insure proper installation. Sleeve set 23580 is to be used with our Dodge & Jeep Offset Ball Joints (part...
SPC Performance BMW Rear Toe Adjustment Tool
$123.99
Quickly and easily adjust rear toe on BMW 3-Series (E46) and Z4 models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on...
SPC Performance BMW Rear Toe Adjustment Tool
$97.99
Quickly and easily adjust rear toe on BMW 3-series (E36) models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on these BMW...
SPC Performance Boot Replacement Kit - 2
$49.99
Boot replacement kit for SPC Audi arms. These fit the all 81350, 81360, 81370 and 81380 series arms. The kit includes 2 boots and 4 snap rings to service 2 control arms. California Residents WARNINGInstallation...
SPC Performance BUBBLE FOR 8113
$28.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance BUSHING PRESS SET
$386.99
Easily replace press-in type control arm bushings on many domestic and imported vehicles with this service kit. Mechanical power screw quickly and easily removes worn bushings and installs them without damaging the control arm. Set...
SPC Performance BUSHING PRESS SET (29 PCS )
$1,221.99
Service a wide range of bushings with this versatile press set. Our 29 piece kit will allow you to efficiently remove and install bushings from 1 1/2" to 3" OD (36-80mm ). Save time by...
SPC Performance C FRAME FOR 7250
$174.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance C-CLAMP & SCREW - 40920
$208.99
Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.
SPC Performance CAM KNOCKOUT OUT PUNCH
$160.99
A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles and the newer Jeep JK's and an...
SPC Performance CAMBER ADJUSTMENT KIT
$77.99
These heavy duty adjusters provide up to +-2-1/2deg front camber change for Chysler/Dodge/Plymouth Mini-Vans and FWD cars along with VW Routans. Use Rotary File Set 85130 to elo ngate holes. California Residents WARNINGInstallation InstructionsThis Part...
SPC Performance CAMBER ADJUSTMENT KIT
$92.99
This cam bolt kit changes camber up to 2-1/2deg. It includes an adjusting plate to make the camber adjustment possible. After elongating the lower strut/spindle bolt hole with a rotary file, install the 82120 bolt...
SPC Performance CAMBER ADJUSTMENT KIT ADJUSTS + or - 0.5 DEGREES
$52.99
Quickly restore lost adjustment due to frozen or broken adjusters with this rear camber adjustment cam from SPC. This cam is is designed to fit late model Hyundai Veloster and Kona models as well as...
SPC Performance Camber Adjustment Kit Rear 13-15 Lexus GS350 / 14-15 Lexus IS250
$304.99
Use this adjustable rear upper control arm to replace the OE arm and get +-3deg of camber on the Lexus IS250, IS350, GS350, and RC350 models. SPC's adjustable camber link is manufactured from high-grade aluminum,...
SPC Performance CAR CAMB KIT ASST BOARD
$1,164.99
This Board Set includes our most popular cam bolt kits. This is a "must have" for any shop performing 4 wheel alignments on passenger cars. Shipped with our high-strength polymer display board . California Residents...
SPC Performance Carbide Insert for RELS Brake Lathe - Pack of 10
$116.99
This pack of 10 positive rake, carbide inserts are designed to be direct replacements for RELS type brake lathes. These will fit both left and right hand tool holders. Triangular shape features 3 cutting edges...
SPC Performance CARBIDE INSERT-ACCUTURN
$62.99
FITS MODEL#S 8911,8922,8944,8989,8991,8993------ OEM #433795----POSITIVE RAKE----3 CUT EDGES 5 bits per pack. California Residents WARNING
SPC Performance CARBIDE INSERT-ACCUTURN
$98.99
for Accu-Turn Model #s 8911,8922,8989,8991,8993 OEM #433796-------POSITIVE RAKE-----3 CUT EDGES 10 bits per pack. California Residents WARNING
SPC Performance CARBIDE INSERTS
$133.99
For Rels Models 204C,204D,204S,205DC,415- Rels part # 29687V For Van Norman Models 243XV,204C,204D,204S,205DC,415 Van Norman Part # 129687,866561 ----3 cut edges----positive rake 10 bits per pack. California Residents WARNING