Amodern, multifunctional formulation that can be used in a variety of applications. Thanks to its high adhesion and high temperature resistance it can be used as a release agent, to prevent seizing, cold welding, rust...
Spray components before installing them. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush. Note: After spraying on, allow a flash-off...
Fully synthetic high-performance motor oil provides optimum performance and engine protection in all operating conditions. Ensures outstanding engine cleanliness, excellent friction behavior and minimum wear together with perfect clutch operation, and smooth gear shifting.Installation InstructionsMaterial...
Keeps rubber and plastic seals in automatic transmissions soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow while restoring the oils...
For best results and long-term effect add DPF protector exery 2.000 km (1.200 miles). One 300 ml can is sufficient for 75 liters (20 gal.) of Diesel. Minimum fuel filling of50 liters (14 gal.) is...
A combination of agents, developed specifically for late model hybrid engines. Removes deposits in the fuel system and protects against corrosion. Stabilizes the fuel and protects against aging and oxidation. Diminished fuel degradation allows better...
If required, clean the leather surfaces to be treated and let dry. Shake Leather Care vigorously before use. Next, pour onto a soft cloth or rag and, using circular motions, apply thinly and uniformly under...
One 250 ml can is sufficient for minimum 3 liters(0.8 gal.) to maximum 4.5 liters(1.2 gal.) of oil. Add Motorbike Engine Flush to the motor oil atoperating temperature before changing the oil. After adding the...
Filling the dosage chamber (25 ml) once is sufficient for max. 5 liters (1.3 gal.) of fuel. Add to the fuel and repeat dosage after refueling. Also suitable for long-term use in seldom used engines....
High-tech fuel additive, developed specifically for improved throttle response under partial engine load. Optimizes fuel atomization and combustion, cleans fuel system while providing maximum engine performance and efficiency.Product Specifications SheetProduct Specifications Sheet
High-tech anti-wear additive, suitable for most 4-stroke engines as well as manual transmissions and compressors.Reduces friction and wear thanks to a unique combination of ceramic compounds and chemical anti-wear agents. It will prevent direct metal-to-metal...
To prepare, attach tube with nozzle. To gain access, remove hose or pipe immediately before throttle housing. The engine needs to run to perform cleaning. If unable to start engine, disconnect air mass sensor connector...
To prepare, attach tube with nozzle. To gain access, remove hose or pipe immediately before throttle housing. The engine needs to run to perform cleaning. If unable to start engine, disconnect air mass sensor connector...
Spray Vehicle Interior cleaner onto the parts and surfaces to be cleaned or apply using a damp sponge or cloth. Allow to take effect according to the degree of contamination but do not allow to...
Acombination of additives that clean and maintain diesel fuel systems. Prevents corrosion and increases lubrication thus reducing fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions. Regular...
To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically....
Cleaning is made with the compressed air gun for DPF (item no. 7946) and the specially developed DPF-Probe with 5 interchangeable tips (part no. 7945). The diesel particle filter must be accessed depending on the...
One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the...
To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically....
To be added directly into the fuel tank. Use aspreventive or to cure acute engine problems. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters (7 gal.) is requested for optimum...
Aneffective mixture of additives to clean and maintain the fuel system of port injected and carburetedgasoline engines. Cleans injectors, the combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine efficiency. Regular...