All
Edelbrock Calibration Kit for 1901 / 1902 / 1903 / 1904
$145.99
The AVS2 Series Carburetor Calibration Kit #1940 is for tuners looking to custom-tune the performance of their #1901, #1902, #1903 or #1904 carburetor. This kit contains all of the necessary metering rods and jets that...
Edelbrock Calibration Kit for 1905 / 1906
$134.99
The AVS2 Series Carburetor Calibration Kit #1948 is for tuners looking to custom-tune the performance of their #1905 or #1906 carburetor. This kit contains all of the necessary metering rods and jets that will allow...
Edelbrock Calibration Kit for 1912 / 1913
$143.99
The AVS2 Series Carburetor Calibration Kit #1949 is for tuners looking to custom-tune the performance of their AVS2 Series #1912 (manual choke) or #1913 (electric choke) 800 CFM carburetor. This kit contains all of the...
Edelbrock Carb Adapter - Square-Bore Carburetor to Stock 4-Jet/4GC Intake - 0.750in
$70.99
The Edelbrock Carburetor adapter #2695 adapts an Edelbrock square-bore carburetor to a stock 4-Jet / 4GC intake manifold.Warranty
Edelbrock Carb Spacer 1-Inch 1-Hole
$99.99
The Edelbrock Carburetor Spacer #8710 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8710 open spacer is 1" thick and made of Black...
Edelbrock Carb Spacer 1-Inch 4-Hole
$99.99
The Edelbrock Carburetor Spacer #8712 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8710 open spacer is 2" thick and made of Black...
Edelbrock Carb Spacer 2-Inch 1-Hole
$106.99
The Edelbrock Carburetor Spacer #8712 is an open design used to add more plenum volume or add more distance from carb-to-plenum floor distance. The Edelbrock #8710 open spacer is 2" thick and made of Black...
Edelbrock Carb Spacer 2-Inch 4-Hole
$109.99
The Edelbrock Carburetor Spacer #8713 4-hole design enhances low-rpm torque and throttle response and dampen reversion effects on the carb. The Edelbrock #8711 4-hole spacer is 2" thick and made of Black Phenolic Plastic.Warranty
Edelbrock Carb Spacer Kit 3-Bolt 94 Series Carburetor Black Laminate Fiber
$93.99
This Edelbrock #8751 is a 1/4" heat insulator spacer kit for Edelbrock 94 Series and Stromberg 97 3-bolt carburetors. The black wood laminate fiber spacer is ideal for reducing heat transfer from the intake manifold...
Edelbrock Carb Throttle Ball Assortment Holley Service Parts Pack of 4
$48.99
The Edelbrock #12413 Carburetor Throttle Ball Assortment comes with 4 different carburetor ball studs, supplied with hardware.
Edelbrock Carb to Q-Jet Adapter Kit
$168.99
The Edelbrock Square-bore Carb to Spread-bore Manifold Adapter #2697 is designed to allow installation of the Edelbrock Performer Series carburetor on vehicles with the OEM (original equipment) spread-bore intake manifold (typically GM vehicles that were...
Edelbrock Carburetor Mounting Studs Bullet Nosed Black Oxide Gold Iridite Washers/Nuts Set of 4
$49.99
Edelbrock Carburetor Mounting Studs Bullet Nosed Black Oxide Gold Iridite Washers/Nuts Set of 4Warranty
Edelbrock Carburetor Mounting Studs Bullet Nosed Black Oxide Gold Iridite Washers/Nuts Set of 4
$51.99
Edelbrock Carburetor Mounting Studs Bullet Nosed Black Oxide Gold Iridite Washers/Nuts Set of 4Warranty
Edelbrock Carburetor Rebuild Kit Edelbrock 94
$104.99
The Edelbrock #1154 Rebuild kit has everything needed to rebuild any Edelbrock 94 carburetor. Includes fuel inlet seat, fuel inlet needle, accelerator pump assembly, accelerator pump spring, accelerator check ball, check ball retainer, power valve...
Edelbrock Carburetor Two-Barrel Non-Progressive Throttle Linkage Kit 3X2
$295.99
The Edelbrock part #1034 Non-Progressive Linkage Kits are designed to facilitate the synchronous operation of multiple two-barrel carburetors. The #1034 is designed to support triple two barrel applications.- If you have another make or model...
Edelbrock Chev Thr A/T Cab Ext
$45.99
Chevrolet:Big-Block Mark IV:396 (6.5L)-502 (8.2L);Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)Warranty
Edelbrock Chevy Kick Down Brkt
$48.99
Edelbrock part #8020 Automatic Transmission Kick Down Lever Kit is designed for use with Chevy applications using early Holley Double-Pumper carburetors.Installation InstructionsWarrantyInstallation Instructions
Edelbrock Chevy Thr Cab Adapt
$38.99
Chevrolet:Big-Block Mark IV:396 (6.5L)-502 (8.2L);Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)Warranty
Edelbrock Chevy Thro Rod Kit
$80.99
The Edelbrock #8010 Chevy/GM Throttle Rod ?Extension Kit is designed to allow the customer to extend the reach of their factory throttle rod to connect to the throttle arm of an Edelbrock or other aftermarket...
Edelbrock Chevy Throttle Bracket
$94.99
Edelbrock part #8036 Throttle, Cruise Control & Trans. Kick-Down Mounting Bracket is designed for Small-block Chevy (1978 & earlier with TH350, 200R4, or 700R4 trans.) with Gold Plated Finish.Installation InstructionsWarranty
Edelbrock Chock Block Off 3711
$72.99
The Edelbrock #8951 Choke Block-Off For?Small Block Oldsmobile for #3711 Intake ManifoldWarranty
Edelbrock Choke Bracket Edelbrock 94
$52.99
The Edelbrock 94 Carburetor choke bracket kit #1156 provides users with a means of holding a manual choke cable in place upon attaching the cable pull to the carburetor. It includes the bracket and associated...
Edelbrock Choke Cable Bracket and Clamp Assembly for Edelbrock Carburetors
$44.99
The Edelbrock Carburetor Choke Cable Bracket & Clamp assembly #1494 provides users with a means of holding a manual choke cable in place upon attaching the cable pull to the carburetor. The kit includes the...