High performance grease for a wide application range in all motor vehicles and for general machine lubrication. Thanks to added MoS2 it offers outstanding protection during extreme loads and high heat and also adds limp-home...
Arelease agent, specifically designed for high temperature applications on threaded connections and parting surfaces which are exposed to high temperatures, high pressures and corrosive effects in turbines, compressor equipment, exhaust systems, spark plug threads etc....
Maintains and cleans helmets and visors. Active anti-fog treatment for glass or plastic visors. With long-lasting effect. Removes dirt, insects, oil and siliconefilms. Provides clear vision and safety.Installation InstructionsMaterial Safety Data Sheet
For all gasoline engines. Suitable for standard and high-octane gas, leaded and unleaded. 150 ml is sufficient for up to 75 liters (20 gal.)of fuel.Minimum fuel filling of 25 liters (7 gal.) is requested for...
Semi-synthetic LIQUI MOLY specialty oil with an additive package containing Molybdenum Disulfide (MoS2). The unique formulation adds a high pressure and temperature resistant lubricating layer to all friction surfaces for added wear protection and safety...
Low-friction, fully synthetic motor oil for all-season use in gasoline and diesel engines without particulate filters (GPF/DPF). Benefits: - saves fuel- instant lubrication after cold start- maximum engine performance- keeps engine cleanProduct Specifications SheetProduct Specifications...
Wash the vehicle thoroughly before application. Shakewell before use.Use a cloth or sponge to apply and work into the affected area while using light pressure (polish with a foam buffing machine at 1,500 to 2,000...
Ahigh-performance lubricant appropriate for a variety of marine usage. Reduces friction and wear. High shear stability provides excellent resistance to aging. Cold and hot water resistant, water repellent and saltwater resistant. Long lasting in wet...
Will immediately seal small leaks caused by external damage, porous solder joints and hairline cracks in cooling systems of all water cooled engines. Coolant is prevented from entering the combustion chamber due to internal leaks...
One 300 ml can of Liqui Moly hydraulic tappet additive is sufficient for up to 6 liters (1.5 gal.) motor oil. The product can be added at any time. After adding, run the engine until...
One 300 ml can is sufficient for up to 75 liters (20 gal.) of fuel. Regular use keeps injection system in perfect working order and gives lowest exhaust emissions. Smoother idling, better throttle response. Injection...
MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to...
Contents sufficient for max. 5 liters (5.28 U.S. QT) of motor oil, minimum filling of 3 liters (3.17 U.S QT) is requested for optimum product performance. The product is self mixing and can be added...
Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the...
A combination of additives to clean and maintain the diesel fuel system. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions....
Can contents (300 ml) are sufficient for up to5 liters (5.28 U.S. QT)of motor oil. After adding to the motor oil, allow the engine to run warm. The product can be added at any time....
Keeps rubber and plastic seals in hydraulic power steering systems soft and pliable. Leaks caused by hardened and brittle seals are prevented or eliminated. Cleans internal oil passages to allow proper oil flow, reduces noise...